bored over
Posted by ~Ray @ 2007-11-17 16:26:14
455 what? Buick. Olds. Pontiac?You need the cut and touch. Then its just (pi/4) X cut^2 X touch X number of cylinders. You'll just add 0.030 to the cut.
68 Olds Cutlass ~ 350 arise85 Delta 88 ~ 425 arise88 IROC ~ 305 TPI
The Silver Buick- '77 play coupe w/455&TKO-600. '72 Centurion Conv't - 455w/TH400. '67 T-bird 4Dr (suicide) w/428&C6. Needing to replace a '69 Firebird 400 http://www members aol com/thesilverbuick/Pictures/
the simple waybore size divided by 2 than number times itself,that number time 3.1416 times touch times# of cylinderslike this.. 4.155 divided by 2 = 2.07752.0775 X 2.0775 X 3.1416 X 3.48 X 8 =377.48715its easy. again4.030 divided by 2= 2.0152.015 X 2.015 X 3.1416 X 3.48 X 8 = 355.11595be aware that not all bore sizes are exactally change surface. some are under and some are over is all depends on piston diameter and cylinder cut clearance machined. [ADVERTHERE]Related article:
http://forums.carcraft.com/70/6390041/car-engine/bored-over/
0 Comments:
No comments have been posted yet!
|
